Midi Gel Dryer
Product Introduction
The microprocessor of the Midi Gel Dryer controls temperature from ambient +5ºC to 90ºC with a timer from 0 to 9999 minutes to heat gels from the base plate while connected to a vacuum pump to remove the moisture and dry gels homogeneously. The surrounding groove design and sealing silicon rubber mask ensure optimal sealing when connecting to a vacuum pump.
Features
- Drying area (WxL): 310x210mm or 450x350mm
- Microprocessor for temperature control
- User temperature calibration
- Timer with alarm
- 2 digital LED displays
- Remember to turn the red valve on when start sucking from inlet port of vacuum pump.
- Remember to prepare a vessel/bottle which has 2 ports for outlet and inlet to gather the fluid.
- A container with some ice will help cooling down the temperature in the bottle. In addition, it also helps reducing the chemical odor.
|
Cat. No. |
MG-2131 |
MG-3545 |
|
Drying Area (WxL) |
12.2"x8.3" (310x210mm) |
17.7"x13.8" (450x350mm) |
|
Display |
Two of 4 digital LED |
|
|
Control |
Digital Microprocessor Controller |
|
|
Temperature Control Range |
Ambient to 90oC |
|
|
Temperature Increment |
0.1oC |
|
|
Temperature Calibration |
Yes |
|
|
Timer |
9999 (min) |
|
|
Operating Temperature |
Ambient to 40oC |
|
|
Weight |
Approx. 19.8lb (9.0kg) |
Approx. 33lb (15.0kg) |
Write Your Own Review
Product Introduction
The microprocessor of the Midi Gel Dryer controls temperature from ambient +5ºC to 90ºC with a timer from 0 to 9999 minutes to heat gels from the base plate while connected to a vacuum pump to remove the moisture and dry gels homogeneously. The surrounding groove design and sealing silicon rubber mask ensure optimal sealing when connecting to a vacuum pump.
Features
- Drying area (WxL): 310x210mm or 450x350mm
- Microprocessor for temperature control
- User temperature calibration
- Timer with alarm
- 2 digital LED displays
- Remember to turn the red valve on when start sucking from inlet port of vacuum pump.
- Remember to prepare a vessel/bottle which has 2 ports for outlet and inlet to gather the fluid.
- A container with some ice will help cooling down the temperature in the bottle. In addition, it also helps reducing the chemical odor.
